 【Origin Pic】 |
|
|
|
ASIASEAL New Material Technology (Shandong)
Dongguan ASIASEAL New Material Technology
Dongguan ASIASEAL New Material Technology
Chain to Shandong
Yahai website
Chain to Shandong
Yahai website
E-500AH is a one-component, non-volatile epoxy resin adhesive with the following characteristics:
1. Single-liquid type, easy to operate.
2. High heat-resistant temperature, with the characteristic of not sagging during the curing process.
3. Good adhesion to general metals, plastics, magnetic cores, etc.
4. After hardening, it has excellent electrical properties and chemical resistance.
5. It is suitable for connecting electronic components such as transformer components, inductors and relays.
6. Special diluent can be added to increase fluidity and magnetic powder can be added to increase the magnetic permeability, but the maximum proportion of diluent cannot exceed 6%.
1) General characteristics of E-500AH
| Check Project | Condition | Units | Detected value |
| Paint Appearance | - | - | Black Liquid |
| Viscosity | 25C ,BROOKFIELD RVF Viscosity | CPS | 16,000±2000 |
| Solution coefficients | 25C ,BROOKFIELD RVF Viscosity | 2.8-3.2 | |
| Specific gravity | 25℃ | 1.65±0.5 |
2) Characteristics of cured product (curing condition: 140±10℃×50±5min curing)
| Projects | Units | Measured value | Condition |
| Color | Black | Visual inspection | |
| Glass transition temperature | ℃ | 70 | dj-300-007 |
| Hardness | 70±5 | ASTMD 2240ASTMD 2240 | |
| Shear Adhesion | Kgf /m² | 230 | 25℃ |
| Tension Strength | Kgf /m² | 500 | 25℃ |
| Expansion number (cooked expansion coefficient above and below Tg) | ×10-5/K | 5.77 | TMA method |
| 1.35 | |||
| Water Absorption | Wt%/1h boil | 0.3 | JIS K 7209 |
| Hard shrinkage | % | 0.8 | SPEC |
| Dielectric Strength | KV/mm | 18 | JIS K 6911 |
1. When it touches the skin, immediately wipe it with a tissue or towel, and then wash it with soap.
2. When it gets in the eyes, wash it with water and check with a doctor immediately.
3. Please install exhaust device in the operation place and heating device place.
4. When using, please place the product at room temperature for 24 hours before use.
5. The use time after opening is no more than 2 weeks (be sure to close the lid after opening the package and place it at room temperature).
1. Store in a dark place at room temperature.
2. The storage time is 3 months in the unopened state.